Exploratory Analysis of the Winter Chemistry of Five Lakes on the North Slope of Alaska1

Abstract: Lakes are important water resources on the North Slope of Alaska. Freshwater is required for oilfield production as well as exploration, which occurs largely on ice roads and pads. Since most North Slope lakes are shallow, the quantity and quality of the water under ice at the end of winter are important environmental management issues. Currently, water‐use permits are a function of the presence of overwintering fish populations, and their sensitivity to low oxygen concentrations. Sampling of five North Slope lakes during the winter of 2004‐2005 shed some light on the winter chemistry of four lakes that were used as water supplies and one undisturbed lake. Field analysis was conducted for oxygen, conductivity, pH, and temperature throughout the lake depth, as well as ice thickness and water depth. Water samples were retrieved from the lakes and analyzed for Na, Ca, K, Mg, Fe, dissolved‐organic carbon, and alkalinity in the laboratory. Lake properties, rather than pumping, were the best predictors of oxygen depletion, with the highest dissolved‐oxygen levels maintained in the lake with the lowest concentration of constituents. Volume weighted mean dissolved‐oxygen concentrations ranged from 4 to 94% of saturation in March. Dissolved oxygen and specific conductance data suggested that the lakes began to refresh in May.     

Competitive interactions among sessile organisms in Tomioka Bay,south Japan: importance of light conditions on the panel surface

Interspecific competitive interactions among sessile epibenthos were studied by suspending PVC panels at Tomioka Bay, south Japan, for a maximum period of 16 mo. Interactions were monitored from photographs of a fixed area of the panels. Four panels were suspended during two different months in autumn 1991, and the development of the community was followed until December 1992. Altogether, 6511 interspecific overgrowth interactions were recorded, of which 37 resulted in standoffs and the rest in overgrowths. The competitive relationship observed in this sessile assemblage followed the pattern of a hierarchy with numerous backloops. Among the 36 species, belonging to the seven taxonomic groups encountered during the study, the colonial ascidian Didemnum moseleyi was recorded as the dominant species (with respect to competitive ability) while the barnacle Balanus trigonus was the weakest species. The month of panel exposure and whether or not the panel surface was shaded had a significant influence on the competitive ability of the sessile organisms. The order of hierarchy of the most dominant species changed with the month of panel submersion and its light conditions. Among the several abundant species tested, longer residence times were recorded for serpulid worms than for the colonial species. A significant, positive relationship was obtained between the areal cover of competitively dominant sessile organisms and the number of their interspecific interactions. From the short residence time of sessile organisms and the significant relationship between their areal cover and number of interspecific interactions, it is concluded that the interspecific interactions played important role in the species succession.     

Stability of a Coal Waste Artificial Reef

The feasibility of using U.K. coal-fired power station waste materials for artificial reef production is being examined. in June, 1989, an experimental artificial reef was constructed in Poole Bay, off the central south coast of the U.K., using three different mixtures of pulverised fuel ash (PFA), flue gas desulphurisation (FGD) gypsum and slurry, stabilized with cement and formed into blocks. Fifty tonnes of 40 × 20 × 20 cm blocks were formed into eight conical reef units replicating three different PFA/gypsum mixtures and one concrete control. the reef structure is 10m below chart datum on a flat sandy sea-bed.

Combustion of coal concentrates the heavy metal content in the resultant ash. the purpose of stabilization of the ash as blocks is twofold: to immobilize heavy metals (or other components) and to provide hard substratum for the attachment of organisms. to examine the effectiveness of this stabilization and hence the environmental compatibility of the block materials, heavy metal (Cd, Cr, Cu, Pb, Mn, Ni, Zn) content of the blocks has been monitored routinely over two years, to determine leaching rates. Sectional profiles indicate partial replacement of calcium content by magnesium. Associated with this there has also been some redistribution of heavy metals. Only in the case of cadmium has there been a detectable loss from the surface of blocks. Chromium and manganese concentrations appear to have increased. the metal content of the reef epibiota (including ascidians, Ascidia mentula; hydroids, Halecium spp.; bryozoans, Bugula spp. and red algae) growing on the ash blocks has been compared to that of epibiota attached to the concrete controls and surrounding sea-bed. to date no evidence of excess bioaccumulation of metals has been detected.

The physical integrity of the ash reef blocks has been maintained. There is evidence that the blocks are increasing in compressive strength.

An indication of the fishery enhancement potential of the experimental structure is given by the presence of eight commercially fished species (crustaceans and molluscs) including lobsters (Homarus gammarus).     

The gill symbiont of the hydrothermal vent mussel Bathymodiolus thermophilus is a psychrophilic,chemoautotrophic, sulfur bacterium

Certain hydrothermal vent invertebrates, e.g. Riftia pachyptila and Calyptogena magnifica, are clearly established as harboring dense populations of chemoautotrophic sulfur bacteria in specialized tissues. By contrast, the physiological characteristics of the abundant intracellular gill symbiont of the vent mussel Bathymodiolus thermophilus have been questioned. The low activities of enzymes diagnostic for CO₂ fixation (Calvin cycle) and for sulfur-driven energy generation, as measured by other investigators, have been attributed to bacterial contamination of the gill surface. Based on research at the Galápagos Rift hydrothermal vents in 1988 and subsequent laboratory experiments, the current study confirms that the B. thermophilus symbiont is a psychrophile for which thiosulfate and sulfide stimulate CO₂ fixation. It strongly indicates that the symbiont is a chemoautotroph by establishing the following: (1) Sulfide and thiosulfate can stimulate CO₂ fixation by partially purified symbionts by up to 43-fold and 120-fold, respectively; (2) the ribulose-1,5-bisphosphate carboxylase/oxygenase activity of the symbiont is sufficient to account for its sulfide- or thiosulfate-stimulated CO₂ incorporation; (3) the symbiont's molar growth yield on thiosulfate, as judged by CO₂ incorporation, is indistinguishable from that of free-living chemoautotrophs. Due to the high protein-degrading activity of B. thermophilus gill lysate, it is also suggested that host lysis of symbionts plays a more important role in the nutrition of the vent mussel than in R. pachyptila or C. magnifica, for which no comparable protein-degrading activity was found.     

Sublittoral epifaunal communities at Signy Island,Antarctica. I. The ice-foot zone

Photographs were taken every 0.5 m along three transects of 5.5 m length on shallow rock faces at Signy Island, Antarctica, during the austral summer of 1991/1992. The percentage cover of substratum ranged from 0 to 100% and the colonising communities included representatives of ten phyla. The zone from mean low-water neap level to 1.5 m depth was mostly devoid of organisms as a result of the seasonal formation of the encrusting ice foot. Coralline and macroalgae dominated from 2 to 3 m, and animal groups from 3.5 to 5.5 m. Bryozoans, and to a lesser extent sponges, were the most abundant animal phyla. Within the bryozoans a succession of colonisation of different species was observed, the most abundant two of which occupied >80% of substratum in places. Substratum type seemed to be the main factor influencing community development in the shallow sublittoral at Signy Island, although ice impact prevents community development in the top 1.5 m and limits it over the rest of the transect down to 5.5 m. Depth and profile of substratum also influenced communities within this depth range (particularly taxonomic composition).     

Seasonal fluctuations in sand temperature: effects on the incubation period and mortality of loggerhead sea turtle (<Emphasis Type="Italic">Caretta</Emphasis><Emphasis Type="Italic">caretta</Emphasis>) pre-emergent hatchlings in Minabe,Japan

Incubation period, hatching success, and emergence percentage in loggerhead (Caretta caretta) nests were quantified during the 1993 and 1995 nesting seasons and following incubation seasons in Minabe, Wakayama, Japan. Sand and nest temperatures were also monitored. Over the seasons, daily mean sand temperature at nest depth fluctuated between 18.0°C and 33.3°C, with a steep increase in the second week of July and a peak in late August. Temperatures inside the nest chambers were a few degrees above those of the surrounding sand at the end of incubation. The incubation period ranged from 46 to 82 days. A significant negative correlation was found between mean sand temperature and incubation period. The relationship conformed to the day-degree concept. There was no significant seasonal trend in hatching success, but many pre-emergent hatchlings were found dead in most of the clutches during the warmest part of the season. Emergence percentage was correlated with mean sand temperature calculated for 4 days before emergence, suggesting that mortality may be due to heat. This heat-related mortality is considered to be a common phenomenon at our study site, because the peak in emergences coincides with the peak in high temperatures. These temperature effects on hatchling mortality must be taken into account in estimates of hatchling sex ratios. Because sand temperatures already exceed the optimal thermal range for incubation, this population is vulnerable to even small temperature increases resulting from global warming.     

Effects of bed materials on the performance of an anaerobic sequencing batch biofilm reactor treating domestic sewage

The objective of this study was to determine the best performance of an anaerobic sequencing batch biofilm reactor (AnSBBR) based on the use of four different bed materials as support for biomass immobilization. The bed materials utilized were polyurethane foam (PU), vegetal carbon (VC), synthetic pumice (SP), and recycled low-density polyethylene (PE). The AnSBBR, with a total volume of 7.2L, was operated in 8-h batch cycles over 10 months, and fed with domestic sewage with an average influent chemical oxygen demand (COD) of 358+/-110mg/L. The average effluent COD values were 121+/-31, 208+/-54, 233+/-52, and 227+/-51mg/L, for PU, VC, SP, and PE, respectively. A modified first-order kinetic model was adjusted to temporal profiles of COD during a batch cycle, and the apparent kinetic constants were 0.52+/-0.05, 0.37+/-0.05, 0.80+/-0.04, and 0.30+/-0.02h(-1) for PU, VC, SP, and PE, respectively. Specific substrate utilization rates of 1.08, 0.11, and 0.86mg COD/mgVS day were obtained for PU, VC, and PE, respectively. Although SP yielded the highest kinetic coefficient, PU was considered the best support, since SP presented loss of chemical constituents during the reactor's operational phase. In addition, findings on the microbial community were associated with the reactor's performance data. Although PE did not show a satisfactory performance, an interesting microbial diversity was found on its surface. Based on the morphology and denaturing gradient gel electrophoresis (DGGE) results, PE showed the best capacity for promoting the attachment of methanogenic organisms, and is therefore a material that merits further analysis. PU was considered the most suitable material showing the best performance in terms of efficiency of solids and COD removal.